+91 22 2678 5294

Pressure / Booster Pumps

Our company has been set up with latest equipments and customer specific installation facilities with experienced and skilled professionals to serve all types of Pressure Booster pumps requirements in Mumbai and all across India. We are fully geared to supply world class products with highest standards of quality assurance. We Solicit Export Enquiries for our various models of Pressure Booster pumps in Mumbai and all across India.

Pressure and Booster pumps are ideal for boosting low water pressure in homes where the incoming water supply pressure is inadequate. Pressure and Booster pumps increase water pressure from underground or surface water supplies. Pressure and Booster pumps are ideal for applications where pressure “cycling” must be avoided or where the pump may have interrupted water supply.

Our Pressure and Booster pumps are of high quality and purpose designed electric motor, easy to install. Our Pressure and Booster systems are also compact and quiet system compared to the regular available ones. Our Pressure and Booster pump combines durability with reliability, also combines performance with value.

Automatic type self-priming pumps

Model
Power(hp)
Flow(m3/h)
Head(m)
Suction lift(m)
Pressure switch(bar)
Inlet/outlet(inch)
on
off
MQS130Auto
180
10-30
30-5
9
1.1
1.8
1"×1"
MQS200Auto
250
10-36
33-5
9
1.6
2.6
1"×1"


Whirlpool, Jacuzeee and Spas


Self-priming shallow-well jet pumps with built-in ejector (low head)

Range of Performance :

»
Flow rate up to 70 l/min (4.2 m3/h)
»
Head up to 47m

Limits of Use :
»
Manometric suction lift up to 9m
»
Liquid temperature up to +40℃
»
Maximun ambient temperature +40℃

Construction

Monoblock self-priming centrifugal pumps with ejector housed in the pump body.


Whirlpool, Jacuzeee and Spas


Installation and Use

These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components even in the presence of entrapped air in the fluid being pumped.

They are extremely reliable, economical and simple to use, being particularly suitable for domestic civil and industrial applications such as the automatic distribution of water working in conjunction with surge tanks, for watering gardens, etc.

These pumps should be installed in a covered area, protected against weather.

N.B. It is always advisable to install a foot valve or a non-return valve on the suction opening.

Our Pressure and Booster pumps are of high quality and purpose designed electric motor, easy to install. Our Pressure and Booster systems are also compact and quiet system compared to the regular available ones. Our Pressure and Booster pump combines durability with reliability, also combines performance with value.

Structural Characteristics :

»
Pump Body
:
Cast iron, with UNI ISO 228/1 gas threaded suction & discharge openings, threaded side openings for installing a pressure gauge & pressure switch.
»
Pump Body Cover
:
Cast iron
»
Eject Or Assembly
:
PPO techno polymer (approved for drinking water).
»
Impeller
:
Brass or PPO techno polymer, with centrifugal radial flow type
»
Mechanical Seal
:
Ceramic and graphite
»
Motor Shaft
:
Stainless steel AlS1420
»
Motor
:
with thermal overload protector in single phase motor
»
Protection
:
IP44
»
Insulation
:
Class

Self-priming shallow-well jet pumps with built-in ejector (high head)

Range Of Performance :

»
Flow rate up to 120 I/min (7.2 m3/h)
»
Head up to 96m

Limits of Use :

»
Manometric suction lift up to gm
»
Liquid temperature up to +40℃
»
Maximun ambient temperature +40℃

Construction

Monoblock self-priming centrifugal pumps with ejector housed in the pump body.




Installation and Use

These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components even in the presence of entrapped air in the fluid being pumped.

They are extremely reliable, economical and simple to use, being particularly suitable for domestic civil and industrial applications such as the automatic distribution of water working in conjunction with surge tanks, for watering gardens, etc.

These pumps should be installed in a covered area, protected against weather.

N.B. It is always advisable to install a foot valve or a non-return valve on the suction opening.

Structural Characteristics :

»
Pump Body
:
Cast iron, with UNI ISO 228/1 gas threaded suction and discharge openings, threaded side openings for installing a pressure gauge and pressure switch.
»
Pump Body Cover
:
Cast iron
»
Eject Or Assembly
:
PPO techno polymer (approved for drinking water).
»
Impeller
:
Brass or PPO techno polymer, with centrifugal radial flow type
»
Mechanical Seal
:
Ceramic and graphite
»
Motor Shaft
:
Stainless steel AlS1420
»
Motor
:
with thermal overload protector in single phase motor
»
Protection
:
IP44
»
Insulation
:
Class F

No. Pump Type Discharge Opening mm
Power
Rated Flow Rate m3/h Rated Head mertes Weight kg Packing Dimensions Cm
Single - Phase kw hp
A
SA250(3-10)F 25 0.25 0.33 3 10 7.5 33×21×18.5
B
SA370(6-10)F 50,40 0.37 0.50 6 10 12.1 40.5×26×23
C
SA550(3-18)F 40,32,25 0.55 0.75 3 18 12.3 40.5×26×23
D
SA750(3-24)F 40,32,25 0.75 1 3 24 16 44×27.5×24.5
E
SA750(15-10)F 50,40 0.75 1 15 10 16 44×27.5×24.5
F
SA750(25-6)F 76 0.75 1 25 6 16.5 44×27.5×24.5
G
SA1100(25-9)F 76 1.1 1.5 25 9 16 52×29.5×22.5
H
SA1100(15-14)F 76 1.1 1.5 15 14 17 44×30.5×27.5
I
SA1500(6-30)F 40,32,25 1.5 2 6 30 18 56×27.5×22.5

Aluminum cover submersible pump

Range Of Performance :

Flow rate up to 583 l/min (35 m3/h)
Headupto32m


Limits of Use :
»
Immersion depth up to 5 m
»
Liquid temperature up to +40℃
»
Passage of solid bodies up to φ2 mm
»
Drainage level: 40 mm from the bottom
»
For continuous duty: minimum immersion 240 mm from pump base




Installation and Use

As portable electric drainage and irrigation devices, SA series single-phase vertical submersible pumps are designed for draining clear or slightly dirty water with small solids, they are recommended for domestic, civil and professional use. For draining flooded areas such as cellars and garages or for emptying swimming pools or tanks and for disposing of non-sewage waste water. They are outstanding both in their sturdiness and their reliability.

Structural Characteristics :

»
Pump Body
:
Aluminum, with threaded opening ISO 228/1
»
Suction Grid
:
Stainless steel AlS1304.
»
Impeller
:
Cast iron or nylon with technopolymer open type
»
Motor Frame
:
Stainless steel AlSl304
»
Motor Shaft
:
Ceramic and graphite
»
Double Seal
:
mechanical seal ceramic-graphite or silicon-graphite, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
»
Motor
:
Submersible asynchronous for continuous duty.
»
SA
:
single-phase 220-240 V-50 Hz with thermal overload protector.
»
Insulation
:
Class F
»
Protection
:
IP 68
»
Float Switch
:
with or without float switch, options on request. Type code "F" means pump equipped with float switch.

Top

All rights reserved by United Potteries